Manufacturer Item No: 7 620 000 033
Description
The Truck Radio Calais MP48 is a radio device with CD
drive that is designed for operation in a commercial vehicle
(truck) with 24-V electrical system and for the installation
in a 1-DIN slot.
In addition, the CD changer CDC A08 T (order no.
7 607 274 002), the CD changer IDC A09 (order no.
7 607 274 005), the USB interface (order no. 7 607 541 576)
or other audio devices can be connected to the radio as
optional equipment (not part of the scope of delivery).
The selected audio sources are shown on the display.
If the radio is switched off, the Calais MP48 can be switched
on with the "On/Off tipper", the vehicle ignition, inserting
a CD, the telephone (option) or the IR remote control
(option).
The device is equipped with a four-digit code number for
protection against theft.
Basic Functions and values can be adjusted in a main menu
and a separate audio menu.
Besides the general radio functions, such as station seek
tuning, storing, scanning stations, radio data system (RDS),
programme type (PTY), radio text and audio functions,
such as sound and balance, the device is equipped with a
noise-dependent volume adjustment (GALA).
The radio reception can regionally be switched between
EUROPA and NAFTA (North America/Mexico).
7 levels (FM1, FM2, FMT, MW, MWT, LW, LWT or AM and
AMT) each with 6 memory locations are available for storing
stations.
The built-in CD drive allows playing commercially available
audio CDs, CD-Rs and CD-RWs (Ø 12 cm) with MP3 and
WMA fi les.
MP3 music fi les can be played via the Calais MP48 by using
the USB interface (order no. 7 607 541 576). The radio can
control the MP3 player and show ID3 tags on the display.
Rear loudspeakers can be connected via and additional
amplifi er that is connected to the chamber C1 Pin 1-3.
The volume balance can be adjusted via FAD in the audio
menu.
The Calais MP48 is also equipped with a preamplifi er output
(C1 Pin 4+5), to which an amplifi er can be connected for
operating a subwoofer. The subwoofer function is adjusted
in the AUD menu.
After switch-off, all adjusted values and functions remain
stored.
Technical Data:
| Calais MP48 |
| Dimensions (T x B x H) mm: |
|
(see device diagrams) 180 x 187,5 x 85,5 |
| Weight: |
|
1,3 kg |
| Operating voltage: |
|
+ 24 V |
| Max. current consumption: |
|
5 A |
| Closed-circuit-current cons.: |
|
≤ 10 mA |
| Output power: |
|
2 x 20 W (4 Ω, 1 kHz, d ≤ 10%) |
| Distortion factor: |
|
0,2 % (40 Hz - 9 kHz) |
| Input sensitivity: |
CDC / AUX: |
2 Veff / 10 kΩ |
| |
Tel / Navi: |
1 Veff / 10 kΩ |
| Wavebands Europe |
FM: |
87,5 - 108 MHz |
| |
MW: |
531 - 1602 kHz |
| |
LW: |
153 - 279 kHz |
| Wavebands NAFTA |
FM: |
87,7 - 107,9 MHz |
| |
AM: |
530 - 1710 kHz |
| FM frquency response |
|
55 Hz - 16 kHz ± 3 dB |
| CD frequency response |
|
55 Hz - 20 kHz ± 3 dB |
| Operating angle |
|
-10° ... +60° |
| Perfect viewing angle |
|
12 o'clock |
| Standards |
|
CE, e1, FCC, RoHS, WEEE |
| |
|
Scope of delivery
CALAIS MP48
Operating Instructions
Equipment passport