Your cart is currently empty.
|audiophile-standard portable DAC & headphone amplifier|
|maximise sound quality|
|Hi-Res streaming like never before|
|Quad-Core Burr Brown Multi-Bit / DSD Hybrid DAC supports DSD1024 and PCM768 kHz|
|DSD1024 Studio-quality remastering with Crysopeia FPGA Digital Engine|
|wireless DLNA / Airplay / Ethernet Hi-Res playback|
|tube or transistor analog output stage (user selectable)|
|MQA (Master Quality Authenticated) playback (follows with software update)|
|Global Master Timing Femto-grade clock system with external clock input|
|five filter: Bit-Perfect, Bit-Perfect+, Minimum Phase, Apodising, Transient Aligned|
|completely discrete, passive LC analog filter|
|zero jitter analog buffer and galvanic isolation for all inputs|
|discrete headphone / line amplifier|
|balanced inputs and outputs|
|galvanically isolated ultra-low noise power supply with super-caps|
|fixed or adjustable line output voltage (with remote control)|
|plays directly from USB hard disk or SD card with MUZO player|
|various digital and analog filters can be selected for DSD and PCM|
|we are specialized dealer for HiFi products - your authorized reseller in Leipzig|
iFi Audio - Pro iDSD - compact headphone amplifier & digital-analogue-converter
Every section of the Pro iDSD has received massive attention to detail. Classic design techniques for very low-noise design found in tube equipment have been combined with cutting-edge, 21st Century technology to deliver a superlative performance.
Quad stack – interleaved Burr-Brown DACs
The iDSD Pro uses a Quad ‘stack’ of iFi’s Bit-Perfect DSD and DXD DACs by Burr-Brown in a custom ‘interleaved’ configuration. This enables a total of eight pairs of differential signals to be used and mixed – four pairs of signals per channel.
All signals to the DACs are re-clocked with the low-jitter Global Master Timing® master clock derived from the AMR DP-777 DAC.
The DACs operate ‘Voltage Output Mode,’ giving >119dB dynamic range. All filtering is passive, using a fully-balanced third order capacitor/inductor/capacitor filter, rather than active, feedback-based circuits, to remove ultrasonic noise. (Active filters struggle with the amount of ultrasonic noise and RFI they have to handle and at a few 100kHz they can lose the ability to filter noise at all, which is precisely where a lot of noise is present.)
Using passive CLC filtering directly after the DAC means that the following analogue stage is not required to handle ultrasonic noise and RFI originating from the DAC process.
Studio Grade Remastering DSD1024
For the first time, Pro iDSD brings Studio Grade DSD1024 remastering to the mass. Now one can remaster all his/her music to a superlative DSD1024 format just like in a recording studio and enjoy the ultra-high resolution it provides.
For the DSD1024, if the MultiBit DAC is one half of the ‘heart’ of the Pro iDSD’s digital engine, then the other half is surely the Crysopeia FPGA. This is where we believe FPGA excels, by handling the remastering duties to attain the DSD1024 audio format. In fact the Pro iDSD can handle all audio formats to to DSD1024 or DSD512 or PCM 768kHz with user-selectable digital filters.
XMOS 16-Core X-Core 200 with large memory buffer for all digital inputs
The Pro iDSD features the new XMOS XU216 X-Core 200 Series 16-Core processor,with a maximum of 2,000 MIPS (two billion instructions per second) calculation power in dual-issue mode as a USB interface.
All digital processing is Bit-Perfect, without employing ASRC or up-sampling unless digital filters are explicitly selected. It can decode signals from all Inputs, from USB (up to 768kHz/DSD512), AES/EBU or S/PDIF (up to 192kHz/24Bit) and Wifi/Network/Mass-storage (up to 192kHz/32Bit).
A variety of digital filters (including Bit-Perfect mode without digital filtering) are available.
All inputs (including USB) are galvanically isolated and the USB input is self-powered. The SPDIF inputs use technology derived from the AMR DP-777 including a new, solid-state implementation of the HD-VDi, memory buffer and the Global Master Timing® clock system.
Recording engineers please note that the Pro iDSD supports the AES3id-based DARS (Digital Audio Reference Signal) as recommended in the Audio Egineering Society’s published AES11 standard.
Femto Precision GMT Clock & Reclocker
For all inputs data is sent to the aforementioned Memory Buffer, which iFi describes as ‘large’ and ‘elastic’. Here it is de-jittered to eliminate any transmission of source jitter to the DAC output. The data from the Memory Buffer is further re-clocked by with the low-jitter Global Master Timing® clock, which also drives the X-Core 200 & FPGA.
Wireless Playback Engine
With LINKPLAY™ WiFi/network playback, built-in Spotify and Tidal, and wide protocol support for 32-Bit/192kHz and DSD64, the Pro iDSD can directly link to a router for online music play. This gives it the option to:
In our living room studio "Klangvilla" in Leipzig we feature more hi-fi products which are at all times ready for presentation. You will have the option to be explained and demonstrated also other high-quality high-end devices by our sales manager who will be available for you. We can also recommend the appropriate wiring and other high quality Hi-Fi accessories. Please just simply arrange a date for demonstration or consulting service with our home Hi-Fi sales manager.
|iFi-Audio - Pro iDSD|
|Allgemein / General|
|Farbe /||Colour:||silber / silver|
|Abmaße (H x B x T) /||Dimensions (W x H x D):||213 x 220 x 64 mm|
|Eingänge /||Inputs:||USB für/for DSD,DXD - Abtastraten über/sample rates above 192kHz
S/PDIF Koax/Toslink bis zu/up to 192kHz PCM
BNC multifunction (S/PDIF in oder/or externer Clock-Eingang/sync input)
|Ausgänge /||Outputs:||symmetrischer/balanced XLR mit/with 4,6V (+15dBu – HiFi) oder/or 11,2V (+22dBu – Pro)
unsymmetrischer/unbalanced RCA mit/with 2,3V (HiFi) oder/or 5,6V (Pro)
Kopfhörerausgang 6,3mm Klinke/jack mit/with 5,6V oder/or max. 11,2V (immer mit Lautstärkeregelung/always with colume control)
Kopfhörerausgang/Headphone out 1.500mW RMS x 2 @ 64Ω, 4.000 mW max. x 2 @ 16Ω
|Lautstärkeregelung /||Volume control:||symmetrisches, Sechsgang-ALPS-Potentiometer, motorisiert mit IR-Fernbedienung / Balanced (6-gang) Alps potentiometer, motorised with IR remote control
XLR- und RCA-Ausgänge wahlweise regelbar oder fix / XLR/RCA outputs can be selected as fixed level or adjusted
Kopfhörerausgang 6,3 mm immer regelbar / 6.3mm headphone jack is always adjusted
|PCM Filter /||PPCM Filters:||Bitperfect 44.1–192kHz, wird immer für 352.8–768kHz benutzt / always used for 352.8 – 768kHz
Gibbs Transient Optimized 44.1–384kHz
Apodising 44.1 – 384 kHz
Transient Aligned 44.1 – 384 kHz
|DSD Filter /||DSD filters:||fester 3. Ordnung Analog-Filter @ 80 kHz mit DSD-Korrektur -6 dB / fixed 3rd order analogue filter @ 80kHz with correction for DSD’s -6dB gain|
|Verstärkung (Kopfhörer) /||Gain (headphone section):||0dB, 9dB, 18dB|
|Dynamikbereich /||Dynamic range:||>119dBA (solid-state, PCM, -60dBFS)|
|Ausgangsleistung /||Output power||(16Ω, XLR/RCA): >4.000 mW / >1.500 mW|
|Ausgangsspannung /||Output voltage:||600Ω, balanced/single-ended): >11.2V / >5.6V|
|Eingangsspannung /||Input voltage (Pro iDSD):||DC 9V / 6.7A–18V / 3.35A|
|Eingangsspannung iPower+ /||Input voltage (iPower+):||AC 85V – 265V, 50/60 Hz|
|Stromverbrauch /||Power consumption:||<22W Ruhezustand/idle