iFi-Audio ZEN CAN - fully symmetrical headphone amplifier (1600 mW / Class A output stage / xBASS / 3D sound / incl. power supply)

iFi-Audio ZEN CAN - fully symmetrical headphone amplifier (1600 mW / Class A output stage / xBASS / 3D sound / incl. power supply)

Article number: 11008726

184.00 €

VAT included Plus shipping costs (from 0.00 €)

3% discount: 178.48 € For payment by cash in advance (bank transfer) or pickup on the spot

Immediately available

Highlights

		fully balanced headphone amplifier
		discrete class A circuit
		fully symmetrical dual mono design
		XBass® and 3D Holographic®

Product Description

ifi Audio ZEN CAN – fully balanced headphone amplifier 1600 mW

Laptops, tablets or smartphones have a low power output of only around 1V. With good headphones you lack the power here. You will never hear what your headphones can do. If you feed the analog result of the laptop, tablet or smartphone into the ZEN CAN, you can get 52 times the performance. You will now hear what you missed.

The ZEN CAN has a discrete, symmetrical class-A amplifier circuit that comes from the expensive flagship iFi PRO iCAN. With 15.1 volts at 300 ohms, it has a power that makes even hard-to-drive headphones play.

Extremely low distortion and noise from a circuit design inspired by ifi Audio's flagship headphone amp that uses a dedicated input stage that's level matched to your source, allowing the signal to flow freely through the Class A output stage, literally music in yours ears.

Maximize the power of your headphones to go beyond just getting loud, realizing the full dynamic range of the drivers and experiencing smooth vocals and heart-pounding drums without missing a beat. Delivers up to 1600mW of power into 16 ohms.

Enhanced with signature analog signal processing to deliver more accurate and natural bass frequencies through XBass and present a wider soundstage bringing out the music in front of you through the 3D matrix that replicates listening to speakers without the hassle of setup

Features both a balanced 4.4mm Pentacon and an unbalanced 6.3mm (1/4") front panel headphone output and three rear panel inputs including a 3.5mm line Outs, left and right RCA jacks and a balanced 4.4mm Pentacon connector. In addition, there is a balanced 4.4 output for connection to a power amplifier or active loudspeaker for use as a preamp.

Technical Data

Inputs	4.4mm Pentacon BAL RCA L/R Socket SE 3.5mm Jack SE	4.0V nominal @ 0dBFS, 24 kOhm Zin 2.0V nominal @ 0dBFS, 1 MegOhm Zin 1.0V nominal @ 0dBFS, 1 MegOhm Zin
Max Output	Balanced	>15.1V/385 mW (@ 600 Ohms) >11.0V/1890 mW (@ 64 Ohms)
	S-E	>7.6V/196 mW (@ 300 Ohms) >7.2V/1600 mW (@ 32 Ohms)
Output Impedance (HP)	BAL SE	<2 Ohms <1 Ohm
Z Out	Line out	<200 Ohms
THD & N	Balanced S-E	< 0.0007% (4V out, 600 Ohms, 1kHz) <0.006% (@ 100 mW/1.27V 16 Ohm)
SNR	Balanced S-E	>120dBA (@ 15.2V) >118dBA (@ 7.6V)
Max. Input	Balanced RCA 3.5mm	7.4V RMS 3.8V RMS 1.92V RMS
Gain		0dB, 6dB, 12dB and 18dB
Frequency Response		20Hz - 20kHz (+0dB / -0.03dB)
Power consumption	No Signal Max Signal	~5W ~13W
Input voltage		DC 5V/2.4A AC 100 -240V 50/60Hz
Dimensions		160(w) x 117(d) x 35(h) mm 6.3" x 4.6" x 1.4"
Net weight		515 g (1.14 Ibs)

Scope of Delivery

1x iFi Audio - ZEN CAN - headphone amplifier
1x RCA cable
1x jack adapter
1x power supply
1x user manual