Your cart is currently empty.
You save: 12 %
|qualitative stands / loudspeaker stands for residential use in noble "satin black"|
|beautiful design and excellent workmanship|
|includes quite large top plates for bigger loudspeakers|
|four support columns per stand ensure real heavy load|
|very good value for money|
|very strong load capacity and universally applicable|
|includes isolation gel pads by Atacama|
|we are specialized dealer for many more Hi-Fi products|
The SLX series is the most professional range of loudspeaker stands by Atacama and caters for when a larger top plate is required.
The SLX series consists of a four-column design and provides a fairly stable platform for placing larger bookshelf loudspeakers and other technical devices. Isolating gel pads from Atacama and modern cable management are also part of these chic loudspeaker stands.
These high quality stands / loudspeaker stands by Atacama have been developed in terms of design and construction for demanding audio enthusiasts.
The stands are exceptionally stable and minimize the transmission of vibrations of the housing.
With a height of 20-100 centimeters (without isolation gel pads and floor spikes), the SLX series ensures an optimal placement of the speakers.
The loudspeaker stands are manufactured from heavy gauge carbon steel with high-tensile fixings to maintain optimum rigidity.
Each pair of SLX stands include new 5 mm thick laser cut carbon steel base plates, eight BZP 8 mm adjustable floor spikes featuring stainless steel detailed top caps and upgraded high load trapezoidal (HLT) isolation gel pads for the top plates.
For improved performance the SLX series always comes with isolation gel pads as standard.
These pads help protect the base of your speakers, reduce the chance of slippage and create a dampening barrier to the speakers so improving sound quality.
Floor spikes are also supplied as standard.
In order to protect sensitive floor coverings, special Atacama spike shoes are also available from us.
The top plate is manufactured from thick steel plate. All SLX loudspeaker stands have identical standard top plates of 225 mm width by 225 mm depth and identical standard ground plates of 305 mm width by 305 mm depth. Please note: supported speaker width/depth dimensions should not exceed speaker stand base plate dimensions.
The colour of the stands is "satin black".
The loudspeaker stands from the SLX series are designed and manufactured in the UK.
Attention: in case loudspeakers are shown in pictures these are not included in the scope of delivery.
SLX loudspeaker stands by Atacama are available in these sizes: SLX200 = 245 mm (9.6”); SLX300 = 345 mm (13.6”); SLX400 = 445 mm (17.5”); SLX500 = 545 mm (21.5”); SLX600 = 645 mm (25.4”); SLX700 = 745 mm (27.5“); SLX1000 = 1045 mm (41.1”).
Atacama recommend Atabite SMD-Z 7HD filler to achieve maximum sonic performance.
Atacama recommends that each pair of SLX stands are two thirds filled with Atabite SMD-Z 7HD filler in order to maximize their sonic potential.
Atabite quantity recommendation:
Below are stated the recommended number of tubes to share between each pair of speaker stands. All vertical poles should be equally filled. Amounts are approximate and will not necessarily completely fill the tubes. It is suggested that you experiment with the exact amount to achieve the best sonic results for your particular system setup as the speakers, room acoustics, cable loom, positioning of the speakers and hifi components will determine how much Atabite filler to use to get the best sound from your speakers.
As a general rule, approximately half to two thirds full gives the best results. If you find the speakers are lacking high end detail and sounding dull at the lower end that usually means you have overfilled the stands and will need to reduce the volume of Atabites in each stand.
If the speakers are new, it is suggested that the exact amount of Atabites needed will best be determined once they are run in. Refer to your speaker instructions or contact the supplying retailer/manufacturer for guidelines on running in recommendations.
SLX200 = 1 tub; SLX300 = 2 tubs; SLX400 = 3 tubs; SLX500 = 4 tubs; SLX600 = 5 tubs; SLX700 = 6 tubs; SLX1000 = 7 tubs.
|Atacama - Atabites SMD-Z 7HD - filler for hifi furniture (7 kg in one bucket / made from metal)||Art. Nr.:11006187|
|Spezifikationen / Specifications - Atacama - SLX200 - loudspeaker stands in black|
|Produktserie /||Product series:||SLX|
|Bauart /||Construction type:||Ständer / stand|
|Höhenmaß (Gesamthöhe ohne Bodenspikes) /||Height dimension (overall height excluding floor spikes):||200 mm|
|Höhenmaß (mit Bodenspikes und Isolationsgelpads) /||Height dimension (with floor spikes and isolation gel pads):||245 mm|
|Topplatte (B x T) /||Top plate (W x D):||225 mm x 225 mm|
|Basisplatte (B x T) /||Base plate (W x D):||305 mm x 305 mm|
|Gesamtgewicht beider Ständer (inkl. Bodenplatten) /||Total weight of both stands (including base plates):||12,0 kg|
|Höchstbelastbarkeitsgewicht (pro Ständer) /||Maximum load weight (per stand):||ca. 15 kg|
|Ausführung Ständer /||Finish stand:||schwarz / black|
You save: 7 %
You save: 15 %
You save: 16 %
You save: 19 %
You save: 15 %
You save: 17 %
You save: 15 %
You save: 14 %
You save: 24 %