|music transfer via Bluetooth 4.0 technology with excellent sound quality|
|universal Bluetooth adapter for music streaming|
|certified Bluetooth 4.0|
|Plug&Play installation and Plug&Play function|
|concealed mounting possible|
|also for yacht/boat: waterproof & marine certified|
|features: A2DP, AVRCP, HFP, HID audio streaming|
|auto turn on and off with the ignition (ACC)|
|auto reconnection with the last paired device|
|auto pairing mode|
|auto remote output with music playback (20mA)|
|QDL licensed Bluetooth 4.0 CRS I9chip|
|SSID Name: BTR100|
|power supply voltage 10-16V DC|
|RCA output with 1.0V signal output|
|operating range up to 30 feet (10 meter)|
|very good value for money|
|we are specialized dealer for Ampire products - your authorized dealer in Leipzig|
The AMPIRE BTR100 universal Bluetooth adapter allows music streaming from your smartphone, iPod & iPad in superb quality with A2DP (advanced audio distribution profile). With practical comfort features this rugged receiver is a universal possibility for not visible installation.
Once connected, audio is controlled from the sreaming device. This includes volume and media selection.
The BTR100 can be installed out of sight, as it has no user controls that needs to be accessed.
Blue: remote out wire +12V/20mA
Red: +12V ignition (ACC) Fuse 2A
RCA outputs: red= right, white= left
Ensure that your streaming device has Bluetooth enabled.
Turn the ignition (ACC) on.
The LED (6) starts blinking (pairing mode).
Select BTR100 in your devices Bluetooth setup menu.
When successfully connected, the LED on the BTR100 will stop blinking and remain lit. A single beep will be heard through the connected sound system.
Multiple devices can be paired to the BTR100, but only one device can connect at one time.
The BTR100 will remember the last device which was connected to it and reconnect with it automatically. If that device is not active, then other paired devices can connect manually, or new devices can be paired.
When a connected device is out of range for more than one minute, the BTR100 will automatically disconnect it and returns to pairing mode [the LED (6) starts blinking].
|AMPIRE - BTR100 - Bluetooth 4.0 receiver|
|Produktname /||Product name:||BTR100||Hersteller /||Manufacturer:||AMPIRE|
|Betriebsspannung /||power supply voltage:||10-16V DC (durchschnittlich/average 12V DC)|
|Stromaufnahme /||Current consumption:||40mA max.|
|Bluetooth /||Bluetooth:||Bluetooth 4.0|
|Frequenzbereich /||Frequency range:||20Hz-20kHz|
|Ausgangsspannung /||Output level:||1V RMS|
|Gewicht /||Weight:||118 g|
You save: 48 %
You save: 33 %