signal converter for generating preamplifier signals | ||
adapter for original sound systems with an external amplifier (2 channel signal converter) | ||
allows a simple connection of additional amplifiers to your factory sound system | ||
suitable for all car radios – even those with factory-installed amps | ||
“ADEP.3P circuit” for bypassing radio diagnostic systems | ||
microcontroller-controlled monitoring of the music signal and generation of the remote signal | ||
“Power Save Mode” – significantly reduces the power consumption of connected amplifiers when no input signal is present (after 2 min.) | ||
“Double Activation Circuit” – generates a +12 V remote signal in two different ways to turn on connected amplifiers | ||
excellent sound quality thanks to very wide frequency response (18 Hz - 80 kHz) | ||
high-quality, sealed and gold plated RCA connectors for lossless signal transmission |
The AAC.3 HP - smart active analog high-low converter by the manufacturing company HELIX is a signal converter for generating preamp signals from highlevel speaker signals of the OE car radio.
The integration of car hi-fi components into existing OEM sound systems with an external amplifier becomes more and more challenging as today's lack of preamplifier outputs or incorporate intelligent speaker diagnosis features.
That's where the new Helix - AAC.3 HP comes into play.
The AAC.3 HP is more intelligent than any other signal converter on the market today.
Forget about error messages or loss of features (e.g. the fader) – the integrated ADEP.3P circuit cleverly "bypasses" the speaker diagnosis in factory car radios.
Distorted sounds and increased THD which may occur with conventional high-low converters are prevented as well. Additionally it doesn't load the car radio's amp unnecessarily and therefore reduces its current draw by up to 70 %.
Its “Double Activation Circuit” generates a +12 V remote signal for turning on connected aftermarket power amplifiers in two different manners. Either it detects the DC offset on the speaker outputs of the OE amplifier or it utilizes an integrated, switchable signal detection with variable sensitivity.
Furthermore the AAC.3 HP incorporates Audiotec Fischers proprietary "Power Save Mode", which turns off the remote output if no music signal is present for more than 2 minutes. That's really a great advantage as many cars with "CAN" or similar bus architectures keep the sound system invisibly "alive" for up to 15 min. even if you have already left the car meanwhile.
The AAC.3 HP generates a high-quality preamplifier signal out of the speaker output signal of a factory amplifier and thus allows the easy connection of additional aftermarket power amplifiers. Its wide frequency response of 18 Hz up to 80,000 Hz warrants excellent sound quality and makes this high-low converter ready for High-Res audio reproduction.
For OEM sound systems without a factory assembled amplifier, we recommend using the AAC.3. This is specially developed for the direct connection to the speaker outputs of the factory radio.
Suitable for all OEM sound systems with a separate amplifier and a maximum output power of 155 Watts.
Manufacturer: | HELIX | |||
Product name: | AAC.3 HP | |||
Product type: | Signal converter | |||
Maximum speaker input level: | 25 Volts (= 155 Watts / 4 Ohms) | |||
Input impedance: | 13 Ohms | |||
Maximum output level: | 4.0 Volt | |||
Frequency response: | 18 Hz - 80,000 Hz | |||
Endurance remote output: | 200 mA | |||
Operating voltage: | 7 - 18 Volt | |||
Dimensions (H x W x D): | 77 mm x 37 mm x 20 mm / 3.03" x 1.46" x 0.79" | |||
The device is intended for the automotive sector and therefore has a maximum lifetime of 10 years.