|Compact and stylish twin-lens reversing camera
|Cam1 sensor with 45° and Cam2 sensor with 100° horizontal viewing angle
|High-quality CMOS image sensor with low power consumption
|Detailed, high-contrast image even in twilight conditions
|Injection-molded plastic housing with M16 hollow thread for mounting
|3-part detachable system cable with 17 m main cable length
|we are specialized dealer for many more car hi-fi products - your authorized dealer in Leipzig
The Zenec ZE-RVSC175 is the ultimate solution for semi-integrated and fully integrated motorhomes that require optimum visibility and safety when reversing and maneuvering.
Two camera modules for maximum visibility:
With two specially optimized camera modules, the ZE-RVSC175 offers the perfect view of different areas. The first camera (Cam1) acts as a digital rear-view mirror and provides a clear view of the traffic behind the vehicle. The second camera (Cam2) with a viewing angle of 100° ensures a clear view in the close-up area behind the motorhome.
High-resolution images and improved night vision:
The ZE-RVSC175 is equipped with state-of-the-art PC3089D CMOS sensors that deliver first-class image resolution and a wide contrast range. The Cam2 also features LDR-controlled IR LEDs, which provide excellent illumination of the area behind the vehicle at dusk and at night.
Flexible and easy to install:
The 3-part detachable system cable with a main cable length of 17 meters enables flexible installation in all motorhomes. It is attached using an M16 hollow thread and a 16 mm drill bit for the cut-out is included in the set.
The ZE-RVSC175 is compatible with a wide range of monitors, 1-DIN or 2-DIN moniceivers, naviceivers and infotainers that support the connection and control of two camera systems.
Experience maximum visibility and safety with the Zenec ZE-RVSC175 reversing camera - the perfect addition to any motorhome.
Newer vehicles use a (pulsating) voltage generated via PWM clocking for the power supply of the vehicle exterior lighting, which is unsuitable for image sensors/video electronics or results in functional or image faults. Only use the connection cable supplied. Failure to do so will invalidate your warranty.
The camera is protected against the ingress of dirt and salt water in accordance with DIN EN protection class IP68. However, if the camera is exposed to high-pressure water cleaning equipment (steam jet), even IP68-specified models can be damaged by water ingress. A distance of at least 100 cm from the jet nozzle must therefore be maintained.
|ZENEC ZE-RVSC175 - DOUBLE LENS REVERSING CAMERA
|Camera main cable length:
|Native sensor resolution:
|732(H) x 504 (V) Pixel
|NTSC / 60 fps
|Cam1 + Cam2: 8,5 mm PC3089D CMOS Sensor
|Cam1/Cam2: f6.0 / f2.25
|Angle of view:
|Cam1/Cam2: 45° / 100°
|> 550 TV Linien
|-20° C ~ +70°C
|DC 12 V
You save: 12 %