| ATTENTION: this item is ONLY the original replacement needle | ||
| suitable for 2M Bronze MM cartridge system | ||
| easy installation | ||
| high class cartridge | ||
| superior sound | ||
| fine treble resolution | ||
| elegant case | ||
| easy to adjust | ||
| for light tonearm types |
This little replacement stylus by Ortofon is simply excellent. Installation is easy to adjust thanks to the elegant housing construction with straight edges. With a pleasant resolution a highly detailed sound results that is both enjoyable dynamic and alive.
You will get only genuine goods from the German distribution!
| Specifications - Ortofon - Stylus 2M Bronze - original replacement stylus for turntables | ||||
| Kompatibler Tonabnehmer-Typ / | Compatible pickup type: | MM (Moving-Magnet) | ||
| Frequenzbereich / | Frequency range: | 20-29.000 Hz | ||
| Frequenzgang / | Frequency response: | 20-20.000 Hz +2/-0dB | ||
| Abtastfähigkeit bei 315 Hz / | Tracking ability at 315 Hz: | 80 µm | ||
| Nadelnachgiebigkeit / | Needle compliance: | 22 µm/mN | ||
| Empfohlener Tonarm-Typ / | Recommended tonearm type: | mittelschwer / moderate | ||
| Abtastdiamant / | Stylus type: | Fine Line, nackt / nude fine line, naked | ||
| Verrundung / | Rounding: | r/R 8/40µm | ||
| Auflagekraftbereich / | Tracking force range: | 14-17 mN (1,4-1,7g) | ||
| Empfohlene Auflagekraft / | Recommended tracking force: | 15 mN (1,5g) | ||
| Abtastwinkel / | Scanning angle: | 20 Grad | ||
| Gleichstromwiderstand / | DC resistance: | 1,2 kOhm | ||
| Induktivität / | Inductance: | 630 mH | ||
| Empfohlener Abschlusswiderstand: / | Recommended load impedance: | 47 kOhm | ||
| Empfohlene Abschlusskapazität / | Recommended load capacity: | 150-300 pF | ||
| Gehäusematerial / | Housing material: | Noryl/Glas-Verbundwerkstoff / noryl/glass composite | ||
| Gewicht / | Weight: | 0,2 g | ||
| Ersatz-Nadeleinschub / | Replacement needle insertion: | Stylus 2M Bronze | ||
| Besonderheit / | Special feature: | Wicklung aus versilbertem OFC-Kupferdraht / coil of silver plated OFC copper wire | ||
| Empfohlen für folgende Tonabnehmer / | Recommended for following cartridges: | 2M Bronze (austauschbar mit / interchangable with) 2M Black | ||
![]() |
||||