suitable for OD 2, Super OM 20, OM 20, OMP 20 and TM 20 cartridge systems | ||
good resolution | ||
quiet sound | ||
clean sampling process | ||
needle barrel made of black, high-strength plastic | ||
for numerous new record player in moderate price category | ||
entry model | ||
for light and moderate tonearm types |
This replacement needle is especially suitable for light tonearms. It is most commonly used for modern drivers, but is also used in older turntables with high-quality tone arms.
With its OM-series Ortofon managed to come up with a reference value for MM cartridges. All systems of the OM-series can be identified by the same characteristic needle barrel made of black, high-strength plastic. This lightweight design is ideal for a light to medium weight tonearms. The OM-series systems are therefore very good standard systems for light to medium weight tonearms and thus are suitable for many new turntables in the moderate price category.
You will get only genuine goods from the German distribution!
Stylus Typ 20 - original replacement stylus for turntables | ||||
Kompatibler Tonabnehmer-Typ / | Compatible pickup type: | MM (Moving-Magnet) | ||
Frequenzbereich / | Frequency range: | 20-27.000 Hz | ||
Frequenzgang / | Frequency response: | 20-20.000 Hz +2 dB/- 3dB | ||
Abtastfähigkeit bei 315 Hz / | Tracking ability at 315 Hz: | 80 µm | ||
Nadelnachgiebigkeit / | Needle compliance: | 25 µm/mN | ||
Abtastdiamant / | Stylus type: | elliptisch, nackt / elliptical, naked | ||
Verrundung / | Rounding: | r/R 8/18µm | ||
Entspricht Stiftspitze Masse / | Equivalent stylus tip mass: | 0,4 mg | ||
Auflagekraftbereich / | Tracking force range: | 12,5 - 17,5 mN (1,25 - 1,75 g) | ||
empfohlene Auflagekraft / | Recommended tracking force: | 15 mN (1,5 g) | ||
Tracking-Winkel / | Tracking angle: | 20° | ||
Stylus Farbe: / | Stylus colour: | schwarz / black | ||
Empfohlen für folgende Tonabnehmer / | Recommended for following cartridges: | Super OM 20, OM 20, OMP 20, OMB 20, LM 20, Concorde 20, LM 20H, TM 20U, TM 20H | ||